Diagram 16/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


A/C Control Module, High Pressure Sensor, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC), Recirculation Flap Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G65 - High Pressure Sensor Locations

J301 - A/C Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

SD8 - Fuse 8 (on fuse panel D)

SD15 - Fuse 15 (on fuse panel D)

T3ae - 3-Pin Connector

T6bg - 6-Pin Connector

T16d - 16-Pin Connector, Data Link Connector (DLC)

T16j - 16-Pin Connector, black

T20b - 20-Pin Connector, black

T20e - 20-Pin Connector

V113 - Recirculation Flap Motor Climatronic (Automatic Climate Control) A/C System w/ Automatic Control Component Overview

(279) - Ground Connection 5 (in passenger compartment wiring harness)

(397) - Ground Connection 32 (in main wiring harness)

(685) - Ground Connection 1 (on right front long member) Overview of Ground Connections in Engine Compartment

(687) - Ground Connection 1 (on center tunnel) Overview of Ground Connections in Interior

(B281) - Plus Connection 5 (15a) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Applicable from November 2006

Next Diagram 16/3 (Tracks 15-28)