Electro-Mechanical Parking Brake Button (E538)

Instrument Panel Lamps and Switches

Electro-Mechanical Parking Brake Button (E538)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

The following components are integrated in the Electro-Mechanical Parking Brake Button:

• Electro-mechanical Parking Brake Indicator Lamp (K213)

• -AUTO HOLD- Indicator Lamp 2 (K238)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove side cover - 1 - of instrument panel, do this by inserting (3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in - direction of arrow -.





- Push Electro-Mechanical Parking Brake Button - 1 - out of instrument panel from rear.





- Disconnect the connector - arrow -.





Installing:

Install in reverse order of removal.