Front Entry Lamps (W31) and (W32)

Front Door Lamps and Switches

Front Entry Lamps (W31) and (W32)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• Removal and installation for all entry lights is performed in the same way and is only described for one light.

Entry lights:

• Left Front Entry Light (W31)

• Right Front Entry Light (W32)

• Left Rear Entry Light (W33)

• Right Rear Entry Light (W34)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409), screwdriver) will be positioned, using commercially available adhesive tape.

• Removal and installation for all entry lights is performed in the same way and is only described for one light.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Carefully pry out lights using (3409) or a screwdriver.





- Disconnect the connector.

Bulb, replacing:

- Carefully pry the diffusion lens off the housing.





- Carefully pull lamp - 1 - out of socket.





- Replace the glass base bulb (12V, 5 W).

Installing:

Install in reverse order of removal.