Switches In Center Console

Center Console Lamps and Switches

Switches In Center Console

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

The same procedure is used to remove and install the following components. The procedure is only described for one component.

• Rear Window Shade Switch (E149)

• ASR/ESP Button (E256)

• Parking Aid Button (E266)

• Parallel Parking Assistance Button (E581)

• Tire Pressure Monitoring Display Button (E492)

• -AUTO HOLD- Button (E540)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Carefully remove trim - 1 -.





- Disconnect electrical connector.

- Disengage retaining tabs and remove switch.

Installing:

Install in reverse order of removal.