Diagram 18/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Rear Safety Belt Tensioner Igniter, Driver's and Front Passenger's Safety Belt Tensioner Igniter, Side Airbag Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J234 - Airbag Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

N153 - Driver's Safety Belt Tensioner Igniter 1 Locations

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Locations

N196 - Rear Safety Belt (driver's side) Tensioner Igniter Locations

N197 - Rear Safety Belt (front passenger's side) Tensioner Igniter Locations

N201 - Rear Side Airbag (front driver's side) Igniter

N202 - Rear Passenger's Side Airbag (front passenger's side) Igniter

T3aa - 3-Pin Connector, yellow

T3ac - 3-Pin Connector, yellow

T3l - 3-Pin Connector, blue

T3n - 3-Pin Connector, blue

T3s - 3-Pin Connector, yellow

T3w - 3-Pin Connector, yellow

T75 - 75-Pin Connector

(286) - Ground Connection 8 (in passenger compartment wiring harness)

(294) - Ground Connection 9 (in passenger compartment wiring harness)

* - From May 2005

** - Through May 2005

*** - Only rear side airbag

**** - Only rear safety belt tensioner

Previous Diagram 18/5 (Tracks 43-56)

Next Diagram 18/7 (Tracks 71-84)