Diagram 146/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Safety Belt Switch, Front Passenger's Seat Occupied Sensor, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch

G128 - Front Passenger's Seat Occupied Sensor Passive Occupant Detection System

J234 - Airbag Control Module Control Modules in Interior

J285 - Instrument Cluster Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

T2d - Double Connector, black, connector station driver's side, below seat

T2fu - Double Connector, in front passenger's seat

T2fv - Double Connector, in front passenger's seat

T2fw - Double Connector, in driver seat

T10d - 10-Pin Connector, black, connector station front passenger's side, below seat

T16d - 16-Pin Connector, Data Link Connector (DLC)

T20e - 20-Pin Connector

T32c - 32-Pin Connector

T36 - 36-Pin Connector

T100 - 100-Pin Connector

(285) - Ground Connection 7 (in passenger compartment wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

* - Where applicable

** - Applicable from November 2008

*** - Applicable through October 2008

Previous Diagram 146/4 (Tracks 29-42)