Electro-Mechanical Parking Brake Button E538, Removing and Installing

Electro-Mechanical Parking Brake Button E538, Removing And Installing

The following components are integrated with Electro-Mechanical Parking Brake Button E538 :
- Electro-mechanical Parking Brake Indicator Lamp K213
- -AUTO HOLD- Indicator Lamp 2 K238

Special tools, testers and auxiliary items required







- Trim removal wedge VAS 3409

Removing:

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- When removing switches, trim, covers or displays, prevent damage to visible areas by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).







- Remove side cover - 1 - of instrument panel, do this by inserting trim removal wedge 3409 or a screwdriver into recess - 2 - and pry off cover - 1 - in direction of - arrow -.







- Press Electro-Mechanical Parking Brake Button E538 - 1 - out of instrument panel from rear.







- Release and disconnect electrical connection - arrow -.

Installing:
Install in reverse order of removal.