Glove Box Lamp Switch: Service and Repair

Instrument Panel Lamps and Switches

Glove Compartment Lamp Switch (E26)

• The illustration shows Glove Compartment Lamp Switch - 1 - with instrument panel removed. The instrument panel does not need to be removed in order to remove and install the switch.





• Glove Compartment Lamp Switch - 1 - can be reached through the opened glove compartment and can be unclipped.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Unclip Glove Compartment Lamp Switch - 1 - with connected wire - arrows -.

- Pull out Glove Compartment Lamp Switch as far as wire lengths permit and disconnect harness connector.

Installing:

Install in reverse order of removal.