Fastener Tightening Specifications - Controls, Housing

Fastener Tightening Specifications





• 1 Always replace

Transmission Tightening Specifications

Transmission to Engine Bolts









- A and B -: alignment bushings

- Replace the bolts - 1 through 5 -.

Small cover plate for flywheel to intermediate plate: 10 Nm.

Transmission Mount Bracket to Transmission Bolt





- Replace the bolts.

Tighten the bolts - arrows - to 60 Nm + 90° (1/4) additional turn.

Transmission Mount to Transmission Mount Bracket Bolt





- Replace the bolts.

Tighten the bolts - arrows - to 60 Nm + 90° (1/4) additional turn.