Battery Tester With Printer, Warranty Test

Battery Tester with Printer, Warranty Test

CAUTION!
Batteries that have a colorless or light yellow visual indicator do not have to be tested or charged. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting.

These batteries must be replaced.

- Select warranty test.

- Select inside the vehicle or outside of the vehicle.

- Select at the battery pole or at the battery jump start terminal.

- Section vehicle model.

- Measure the temperature. Hold the temperature sensor approximately 5 cm above the battery pole until the temperature is stable.

- Select the type of battery: standard, AGM, 2*6V or Gel or scan it.

- Select or scan the battery capacity.

- Start the test.

- Print out the test report if necessary.