Generator Bracket With A/C System

Generator Bracket With A/C System (BPY)

CAUTION: Always follow tightening sequence of bracket in order to prevent damage to cylinder block and bracket.

Generator Bracket With A/C System:

Tightening sequence of bracket to cylinder block


Procedure
- Place bracket onto cylinder block.

NOTE: Insert all bolts before tightening to the specified tightening torques.

- Tighten mounting bolts for bracket in the following sequence:
A - Cylinder collar bolt, M10x45, 40 Nm, alignment bore
B - Cylinder collar bolt, M10x45, 40 Nm
C - Cylinder collar bolt, M10x45, 40 Nm
D - Cylinder collar bolt, M10x45, 40 Nm
E - Cylinder collar bolt, M10x45, 40 Nm
F - Cylinder collar bolt, M10x45, 40 Nm