Diagram 107/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


SB-Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G476 - Clutch position sensor Locations

N276 - Fuel pressure regulator valve Locations

SB20 - Fuse 20 (on fuse panel B)

SB24 - Fuse 24 (on fuse panel B)

T2en - Double connector

T4s - 4-pin connector

T5j - 5-pin connector

T14a - 14-Pin Connector, black, connector station 1 in engine compartment, left

T40 - 40-Pin Connector, under electronics box, in engine compartment

Z - Oxygen Sensor (O2S) Heater

Z29 - Heater for oxygen sensor 1 after catalytic converter Exhaust System

(B350) - Positive connection 1 (87a) (in main wiring harness)

(B352) - Positive connection 3 (87a) (in main wiring harness)

(B359) - Positive connection 10 (87a) (in main wiring harness)

* - Only models with engine code BLY, BVZ

** - Only models with engine codes BSE, BSF

Previous Diagram 107/8 (Tracks 85-98)

Next Diagram 107/10 (Tracks 113-126)