Fiber Optic Cables

Fiber Optic Cables

NOTE: Observe general notes for repairs on the vehicle electrical system.

For Volkswagen, no repairs are performed on fiber optic cables. For a repair, the entire fiber optic cable is replaced. Observe the following safety precautions for this:

NOTE:
- Fiber optic cables must not be sharply bent, bending radius must be no less than 25 mm.
- Fiber optic cables must not be routed over sharp edges.
- End pieces (lenses) must not be soiled or grasped with bare fingers.
- Fiber optic cables may not be heated.
- It is not permitted to twist together two fiber optic cables or one fiber optic cable with a copper wire.