Removal and Replacement

Steering Column Switch

Steering Angle Sensor Segment Sensor, Through 10.09

Removing:

- Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Remove the following components in order:

- Remove steering wheel.

- Remove steering column trim.

- Remove Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module, Through 10.09 ]. Steering Column Electronic Systems Control Module (J527), Through 10.09

- Remove Airbag Spiral Spring/Return Spring With Slip Ring (F138). Refer to=> [ Airbag Spiral Spring/Return Spring With Slip Ring, Through 10.09 ]. Airbag Spiral Spring/Return Spring With Slip Ring (F138), Through 10.09

- Disengage catches - arrows - and pull off segment sensor for steering angle sensor - 1 - toward rear from steering column switch unit.





Installing:

Install in reverse order of removal.