Mounting Bracket

Mounting Bracket

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

Removing

- Remove steering column. Refer to => [ Steering Column ] Steering Column.

- Remove instrument cluster.

- Remove bolts - arrows - under console.





- Slide connector - 1 - in - direction of arrow - and remove it from mount in mounting bracket.





- Remove the bolt - arrow A -.

- Remove bolts - arrows B - from console on body.

• The bolts - arrows B - are screwed in from direction of cross member.

- Remove the bolts - 1 - and - 2 - and remove mounting bracket from body.





Installing

- Install mounting bracket and install bolts - 1 - and - 2 -.





- Install bolts - arrows B -.





• The bolts - arrows B - are screwed in from direction of cross member.

- Install bolt - arrow A -.

- Insert connector - 1 - into mount in mounting bracket and slide it in opposite - direction of arrow - until it stops.

- Install bolts - arrows - under console.





- Install steering column. Refer to => [ Installing ] Steering Column.

- Install instrument cluster.

- Perform basic setting on the steering angle sensor (G85) using the Vehicle Diagnosis, Testing and Information System (VAS 5051B).

Tightening Specifications