Front Level Control System Sensor Assembly Overview

Front Level Control System Sensor Assembly Overview

• A replacement front left and right level control system sensor (G78/G289) comes complete with the coupling rod and the upper and lower retaining plate.

• Replace with subframe installed.





1 Subframe

2 Bolt

• M6 x 16

• 9 Nm

3 Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)

• Complete with components.

• Lever - arrow - must point toward vehicle exterior.

• Removing and installing, refer to => [ Front Left and Right Level Control System Sensor ] Front Left and Right Level Control System Sensor.

• If the left front level control system sensor (G78) and the right front level control sensor (G289) were removed and installed, then a basic setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Programming and Relearning.

• After replacing, perform basic setting of the headlamps.

Headlamps basic setting is performed via the Guided Fault Finding function using the Vehicle Diagnosis, Testing and Information System (VAS 5051).

4 Control Arm

5 Nut

• 9 Nm

• Self-locking

• Always replace after removal.