Stabilizer Bar

Front Wheel Drive (FWD)

Stabilizer Bar

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

Removing

• The following work steps are described for the left side of the vehicle. These work steps also apply simultaneously for right side of vehicle.

- Remove the nut - 1 - and pull coupling rod - 2 - out of stabilizer.





• Do not loosen bolt - arrow - for tie rod - 3 -.

- Remove bolts - arrows - for stabilizer clamp.





- Remove stabilizer.

Installing

- Insert stabilizer into vehicle.

- Tighten bolts - arrows - for stabilizer clamp uniformly.





- Install the coupling rod - 2 - in the stabilizer bar and tighten the nut - 1 -.





Tightening Specifications