Adaptive Chassis DCC Components and Installation Locations

Adaptive Chassis DCC Components and Installation Locations

CAUTION!
The body acceleration sensors may not be interchanged with each other.





1 Dampening Adjustment Button (E387)

• Component location: In front of the selector lever in the center console.

• Explanations, refer to => [ Dampening Adjustment Button ] Description and Operation.

2 Shock Absorber with Right Rear Dampening Adjustment Valve (N339)

• Removing and installing, FWD, refer to => [ Shock Absorber, FWD ] Shock Absorber, FWD.

• Removing and installing, AWD, refer to => [ Shock Absorber, AWD ] .

3 Electronic Damping Control Module (J250)

• Component location: Behind the right side luggage compartment trim.

• Removing and installing, refer to => [ Electronic Damping Control Module ] Service and Repair.

• If the electronic damping control module was replaced, then a basic setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Programming and Relearning.

4 Rear Body Acceleration Sensor (G343)

• Component location: On the rear left shock absorber mount.

• Removing and installing, FWD, refer to => [ Rear Body Acceleration Sensor, FWD ] Rear Body Acceleration Sensor, FWD.

• Removing and installing, AWD, refer to => [ Rear Body Acceleration Sensor, AWD ] .

5 Shock Absorber with Left Rear Dampening Adjustment Valve (N338)

• Removing and installing, FWD, refer to => [ Shock Absorber, FWD ] Shock Absorber, FWD.

• Removing and installing, AWD, refer to => [ Shock Absorber, AWD ] .

6 Left Rear Level Control System Sensor (G76)

• Removing and installing, FWD, refer to => [ Left Rear Level Control System Sensor, FWD ] Left Rear Level Control System Sensor, FWD.

• Removing and installing, AWD, refer to => [ Left Rear Level Control System Sensor, AWD ] .

• If the left rear level control system sensor was removed and then installed, then a basic setting to the adaptive chassis must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Programming and Relearning.

Headlamps basic setting is performed via the Guided Fault Finding function using the Vehicle Diagnosis, Testing and Information System (VAS 5051).

7 Left Front Body Acceleration Sensor (G341)

• Removing and installing, refer to => [ Front Body Acceleration Sensor ] Front Body Acceleration Sensor.

8 Shock Absorber with Left Front Dampening Adjustment Valve (N336)

• Suspension strut, removal and installation, refer to => [ Suspension Strut ] Suspension Strut

• Suspension strut, servicing, refer to => [ Strut Assembly Overview ] Strut Assembly Overview

9 Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)

• Removing and installing, refer to => [ Front Left and Right Level Control System Sensor ] Front Left and Right Level Control System Sensor.

• If the left front level control system sensor and the right front level control sensor were removed and installed, then a basic setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Programming and Relearning.

Headlamps basic setting is performed via the Guided Fault Finding function using the Vehicle Diagnosis, Testing and Information System (VAS 5051).

10 Shock Absorber with Right Front Dampening Adjustment Valve (N337)

• Suspension strut, removal and installation, refer to => [ Suspension Strut ] Suspension Strut.

• Suspension strut, servicing, refer to => [ Strut Assembly Overview ] Strut Assembly Overview.

11 Right Front Body Acceleration Sensor (G342)

• Removing and installing, refer to => [ Right Front Body Acceleration Sensor ] Right Front Body Acceleration Sensor.