Diagram 20/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transmission Control Module (TCM), Instrument Cluster, Data Bus On Board Diagnostic Interface, Multi-function Indicator, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G93 - Transmission Fluid Temperature Sensor Locations

G182 - Transmission Input Speed (RPM) Sensor Locations

G195 - Transmission Output Speed (RPM) Sensor Locations

J119 - Multi-function Indicator

J217 - Transmission Control Module (TCM) Control Modules in Engine Compartment

J285 - Instrument Cluster Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

T8aa - 8-Pin Connector, connector station transmission prewiring

T10g - 10-Pin Connector, connector station transmission prewiring

T16d - 16-Pin Connector, Data Link Connector (DLC)

T20e - 20-Pin Connector

T36 - 36-Pin Connector

T52 - 52-Pin Connector

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

(B444) - OBD Connection 1 (in main wiring harness)

* - Through May 2005

Next Diagram 20/3 (Tracks 15-28)