Flywheel: Service and Repair

Flywheel

Special tools, testers and auxiliary items required

• Flywheel Retainer (3067)

Removing

• To prevent damage to the dual mass flywheel when removing, the bolts - B - must not be removed using an air powered impact wrench. Only removing the bolts - B - by hand is permitted.

- Rotate the dual mass flywheel - A - so that the bolts - B - are centered with the holes - arrows -.





- When removing the bolts - B -, make sure that the bolt head is not jammed on the flywheel.

- Install the (3067) in the hole on the cylinder block.





- If reinstalling the old flywheel, mark the flywheel to the engine.

- Remove the flywheel.

Installing

Installation is performed in the reverse order of removal, noting the following:

- Replace the bolts.

Tightening Specifications





1 90° corresponds to a 1/4 turn