Windshield Installation Instructions

Flush Bonded Windows

Windshield Installation Instructions





• Check whether height stops - 1 - are present.

• Windshield does not have markings for the adhesive bead - 2 -. Placing of adhesive bead is between dimensions - 3 and 4 -: on top window edge, from height stop - 1 - toward the inside. On side window edge, from inside edge of applied primer - 3 - toward outside. Lower window edge, from binding profile - 4 - toward inside.

• For the windshield gap and height dimensions, refer to => [ Windshield Assembly Overview ]. Windshield Assembly Overview

• Secure windshield using window adjuster (443 845 631 A) - 5 - during the minimum curing time.

• Always install the plenum chamber cover as described under => [ Plenum Chamber Cover Assembly Overview ]. Plenum Chamber Cover Assembly Overview