Windshield and Rear Window Washer System

Windshield and Rear Window Washer System

- Disconnect by pulling apart both halves of coupling.





- Reconnect by pushing both halves of coupling together until felt and heard to engage.

- Disconnect by turning lock ring - 1 - through 90° - arrow - and then pulling apart both halves of coupling.





- Reconnect by pushing both halves of coupling together and rotating locking ring - 1 - - arrow - until it engages.

- Disconnect by lifting lock ring - 1 - approximately 1 mm - arrow - and then pulling apart both halves of coupling.





- To secure connection, connect hose connection and press in securing ring - 1 - until it engages.

- To secure connection, connect hose connection and press in securing ring - 1 - until it engages.

- Disconnect by raising clip - 1 - - arrow - and then separating coupling from jet.





- To secure connection, connect hose connection and press in securing ring - 1 - until it engages.