Exhaust System, Emission Controls

Exhaust System, Passat

• Flex joint in front exhaust pipe must not be bent more than 10 °, otherwise it may be damaged.

• Replace gaskets and self-locking nuts.

• After exhaust system repairs, make sure exhaust system is not under stress and is far enough from the body. If necessary, loosen clamping sleeve and align muffler and exhaust pipe so that there is adequate distance to body and that weight is evenly distributed among the suspended mounts.

• Exhaust manifold and turbocharger are one component, removing and installing => [ Turbocharger, Removing and Installing ] [1][2]Turbocharger.

Exhaust System, Engine Codes BZB, CAWA, CAWB and CGYA, Assembly Overview.

Exhaust System, Passat, Engine Code CCTA, CCTB, Assembly Overview => [ Exhaust System, Passat, Engine Code CCTA, CCTB, Assembly Overview ] Exhaust System, Passat, Engine Code CCTA, CCTB, Assembly Overview.

Exhaust System, Engine Code CBFA, Assembly Overview => [ Exhaust System, Engine Code CBFA, Assembly Overview ] .

Center and rear muffler, separating => [ Center Muffler and Rear Muffler, Separating ] Service and Repair.

Install exhaust system free of stress => [ Exhaust System, Installing ] Exhaust System, Passat.

Catalytic converters with front exhaust pipe, removing and installing => [ Catalytic Converters with Front Exhaust Pipe, Removing and Installing ] Service and Repair.

Clamping sleeves => [ Clamping Sleeves ] Clamping Sleeves.

Exhaust System, Checking for Leaks => [ Exhaust System, Checking for Leaks ] Testing and Inspection.