Battery Transmitter and Receiver Unit, Fuse and Wiring Harness, Overview

Battery Transmitter And Receiver Unit, Fuse And Wiring Harness, Overview







1 - Positive connection
- Red wire with suitable connection
2 - To terminal 15a
- Connection to terminal 15a.
- Ensure wire is protected by fuse
- Fuse max. 15 A
3 - Antenna ground
- Ensure correct ground connection to body
- Antenna location must be treated with suitable corrosion protection
4 - Transmitting/Receiving Antenna
- Installation locations
5 - Shielded antenna wire
- Wire with coaxial connector
6 - Telephone or two-way radio transmitter/receiver unit
7 - Wiring harness
- Voltage supply positive via read wire, 2.5 sq.mm cross section
- Voltage supply negative via brown wire, 2.5 sq.mm cross section
- If necessary, wire to terminal 15a via black wire 1.5 sq.mm cross section
8 - Fuse Panels
- Install next to battery
9 - To starter
10 - Battery
- Installation location in engine compartment
11 - Negative wire
12 - Body ground