Two Piece Intake Manifold

Air Filter Assembly Overview







1 - Regulator flap
- Only on cold climate vehicles
- With thermal element
- Intake air pre-heating, checking.
2 - 2 Nm
3 - not installed
4 - Connecting hose
- To throttle valve control module J338
5 - Filter element
6 - Mass Air Flow (MAF) sensor G70
7 - Seal
- Replace if damaged
8 - Air filter housing, upper
9 - 2 Nm
10 - Connection
- Clipped into upper part of air filter
11 - 8 Nm
12 - Cover
13 - Air duct
- Fastened to lock carrier
14 - 5 Nm
15 - Gasket
- Replace if damaged
16 - Rubber bushing
17 - 10 Nm
18 - Bracket
- For air filter
19 - Mounting pin, 9 Nm
20 - Connection
- Not equipped on all vehicles
- For warm air intake
21 - Air filter housing, lower