Remote Control Key Battery

Remote Control Key Battery

Removing







Press side button - 2 - on remote control key - 3 - and remove emergency key - 4 -.
- Pull off cover cap - 1 - forcefully in direction of - arrow - of side button - 2 - for remote control key - 3 -.







- Disengage retainers of remote control key - upper section - 2 - on remote control key - 1 -.
- Using trim removal wedge 3409 - 3 -, lift off upper section of remote control key - arrow -.







- Lift battery - 3 - slightly using a screwdriver - 2 -.
- Remove battery - 3 - in - direction of arrow - from retainer - 4 -.

Installing







Note polarity and installation position of battery when installing.
- Guide battery - 2 -, with plus pole facing up, at an angle - arrow - into retainer - 3 - of remote control key - 1 - (plus pole is marked in housing).
- Battery engages in remote control key by applying light pressure.
- Now engage upper section of remote control key with remote control key (do not damage seal).
- Then slide cover on to remote control key. And guide emergency key into remote control key.