Operation CHARM: Car repair manuals for everyone.

A/C Compressor Auxiliary Component Bracket



A/C Compressor Auxiliary Component Bracket (2.0L)

Special tools, testers and auxiliary items required
- Torque wrench V.A.G 1331/(5 to 50 Nm)

NOTE:
- The description of auxiliary component bracket for A/C compressor in the Passat CC, from MY 2009.
- The auxiliary component bracket for A/C compressor and ancillary parts can be removed and installed without opening the refrigerant circuit.
- To remove ribbed belt.







1 - M10x45 hex collar bolt
- Fitting hole
- 2.0L Turbo FSI engine: 40 Nm
2 - M10x45 hex collar bolt
- 2.0L Turbo FSI engine: 40 Nm
3 - M10x45 hex collar bolt
- - 2.0L Turbo FSI engine: 40 Nm
4 - M10x45 hex collar bolt
- 2.0L Turbo FSI engine: 40 Nm
5 - A/C Compressor
6 - Hex bolts M8x100
- Quantity: 3
- 25 Nm
7 - M10x45 hex collar bolt
- Fitting hole
- 2.0L Turbo FSI engine: 40 Nm
8 - M10x45 hex collar bolt
- 2.0L Turbo FSI engine: 40 Nm
9 - Dowel sleeves
- Quantity: 2
- Ensure proper seating between auxiliary component bracket and A/C compressor
10 - Auxiliary component bracket for A/C compressor
No. on auxiliary component bracket 06F 903 143 E/F

Removing
- Remove generator.
- Loosen A/C compressor, unscrew hex-bolts - 6 -. Remove A/C compressor from auxiliary component bracket and secure to body with appropriate material (e.g. welding wire)
- Remove bolts - 1 - through - 4 -, - 7 - and - 8 - and remove auxiliary component bracket - 10 - from cylinder block.

Installing
- Always observe tightening torque of mounting bolts:
- Tighten hex collar bolt item - 1 - (fitting hole), - 7 - (fitting hole), - 4 -, - 8 -, - 3 - and - 2 - in succession.







Securing A/C compressor to body
If A/C compressor is removed and refrigerant circuit not opened, A/C compressor must be secure to body using appropriate material, a welding wire for example.

Make sure that refrigerant hoses remain on A/C compressor without tension for this.

NOTE:
- When installing the belt ensure it is correctly seated in the ribbed belt pulley.
- Last, install ribbed belt over ribbed belt pulley of A/C compressor.