Left Instrument Panel Relay Carrier

Left Instrument Panel Relay Carrier

CAUTION: When disconnecting and connecting battery, the procedure must be followed as described.

Removing:
- Disconnect battery.
- Remove instrument panel.







- Remove relays - arrows - from relay carrier.

NOTE: The number of relays and fuses is dependent on vehicle equipment.







- Clip retainers in direction of - arrow - outward and then press connectors - 1 - through relay carrier.







- Disengage bracket - arrow A - and pull off bracket with fuse from relay carrier in - direction of arrow B -.







- Disengage catches in - direction of arrow - and pull thermo-fuses - 1 - out of mounts.







- Release retaining tab - 1 - in - direction of arrow A - and pull off mount from relay carrier in - direction of arrow C -.
- Release retaining tab - 2 - in - direction of arrow B - and pull off mount from relay carrier in - direction of arrow C -.







- Release retainer - 1 - for relay panel in direction of - arrow - and remove relay panel.

Installing:
Install in reverse order of removal, noting the following:
- First clip connector (for relay), holder (for fuse) and mounts (for thermo-fuses) into relay carrier.







- Place relay carrier - 2 - into guide - 1 - and then engage relay carrier.