Oil Pressure Switch (For Fuel Pump): Service and Repair

Oil Filter, Cooler and Pressure Switch Assembly Overview





1. Assembly Bracket
2. Oil Pressure Switch
^ 1.4 bar - black
^ 21 Nm
3. Gasket
^ Replace
4. O-Ring
^ Replace
5. O-Ring
^ Replace
6. Valve Unit
7. Oil Filter Element
^ 22 Nm
^ Remove and install using oil filter wrench 3417
8. Bolt
^ 15 Nm
9. Connection
10. Seal
^ Replace
11. Oil Cooler
^ Large quantities of metal particles or abraded material detected during engine repairs may indicate a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:
^ Ensure sufficient clearance to surrounding components
12. Gasket
^ Replace
13. Bolt