Transmission Input Speed Sensor

Transmission Input Speed Sensor

Removing

- Remove valve body => [ Valve Body, Removing ] Valve Body.

- Remove bolt - 1 - from Transmission Input Speed (RPM) Sensor (G182).





- Remove sensor from transmission.

Installing

Installation is in reverse order of removal. Pay attention to the following:

- Press sensor into transmission until stop.

- Tighten bolt - 1 - of Transmission Input Speed (RPM) Sensor (G182), tightening torque => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls.

- Install valve body => [ Valve Body, Installing ] Valve Body.