Transmission Output Speed Sensor

Transmission Output Speed Sensor

Removing

- Remove valve body => [ Valve Body, Removing ] Valve Body.

- Remove bolt - 2 - from Transmission Output Speed (RPM) Sensor (G195).





- Remove sensor from transmission.

Installing

Installation is in reverse order of removal. Pay attention to the following:

- Press sensor into transmission until stop.

- Tighten bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195), tightening torque => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls.

- Install valve body => [ Valve Body, Installing ] Valve Body.

Torque specifications => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls