Undamaged Rear Window

Flush Bonded Windows

Undamaged Rear Window

- Remove the rear lid trim panel.





- Disconnect the electrical connectors - 1 - for the heated rear window - arrow - and press connector tabs onto window.

- Remove the rear window wiper motor.

- Pull cutting cord - 1 - through adhesive sealant into vehicle interior at lower area of rear window using (V.A.G 1474/2) from (V.A.G 1474 A).





- Lay cutting cord - 1 - around rear window and pull other end of cord into interior.

- Secure end of cord to (V.A.G 1351/1) - 2 - to counter hold.





- Secure other end of cord to spooling tool - 1 -.

- Cut window free by moving spooling tool - 1 - accordingly.

- While cutting window free, push cutting cord with plastic wedge against window in order to have clearance at window flange.