Undamaged Window, Preparing For Glazing

Undamaged Window, Preparing For Glazing







NOTE:
- When re-using an undamaged window, cut back remaining adhesive sealant to 1 to 2 mm shortly before re-adhering, do not damage primer and ceramic coating.
- Remaining material serves as adhesion base for newly applied adhesive sealing compound.

CAUTION: Do not prime or use a cleaning solution on the adhesive surface. Keep adhesive surface free of dirt and grease.

Exception: If bonding is not performed immediately after cutting back, the remaining material must be activated using the activator D 181 801 A1.