Power Lumbar Support

Front Seats

Power Lumbar Support

• Removal and installation of lumbar support is described for left backrest frame. The same removal and installation instructions for lumbar support apply for right backrest frame.

Removal

CAUTION!
Read the Safety Instructions for working with airbags, belt tensioners and battery cut-out units.

- Mount the (VAS 6136) on the (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the (VAS 6136).

- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Service and Repair

- Remove seat cap. Refer to => [ Cover Cap ] Cover Cap

- Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim. Refer to => [ Power Seat Trim ] Power Seat Trim

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Secure backrest on (VAS 6136).

- Remove headrests. Refer to => [ Headrest ] Headrest

- Remove cover and upholstery from front seat backrest. Refer to => [ Front Backrest Cover and Upholstery, Except Trendline ] Front Seat Cover and Upholstery

- Remove front side airbag. Refer to => [ Front Side Airbag ] Airbag

- Disconnect wiring harness from drive motors - 1 - and - 2 -.

- Drill out rivet - 3 - in lower area on rear side.

- Drill out two rivets - 4 - on left side.

- Drill out two rivets - 5 - on right side.

- Disengage lumbar support from mounts in backrest frame - arrows -.

- Remove components of lumbar support from backrest frame.





Installation

- To install, perform the steps used for removal in reverse order.

To install rivets - 3 -, - 4 - and - 5 -, use (VAS 5072).