Front Bumper Attachments, R32

Front Bumper Attachments, R32

• Depending on the version, the removal and installation process may be slightly different.





1 Cover

• Material PP/EPDM

• Removing and Installing => [ Front Bumper Cover, R32 ] Front Bumper Cover, R32

2 Left side marker lamps

• For different countries

3 Left vent grille

• Removing => [ Radiator Grille, R32 ] Radiator Grille, R32

4 Bolt

• Qty. 2 per side

• 1 Nm

5 Headlamp washer system cover

6 Left protective molding

• Material PP/EPDM

• Locked to cover

• Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.

7 Right vent grille

• Removing => [ Radiator Grille, R32 ] Radiator Grille, R32

8 Right protective molding

• Material PP/EPDM

• Locked to cover

• Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.

9 Headlamp washer system cover

10 Right side marker lamps

• For different countries

11 Radiator Grille

• Removing=> [ Radiator Grille, R32 ] Radiator Grille, R32