Diagram 636/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


All-Wheel Drive Control Module, Oil Pressure/Temperature Sensor, Haldex Clutch Control Valve, Haldex Clutch Pump, Fuel Level Sensor 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch Locations

G169 - Fuel Level Sensor 2 Fuel Pumps And Sensors

G437 - Oil Pressure/Temperature Sensor All-Wheel Drive System Overview

J285 - Instrument Cluster Control Module

J492 - All-Wheel Drive Control Module, on rear differential All-Wheel Drive System Overview

J519 - Vehicle Electrical System Control Module

J... - Engine Control Modules (ECM)

N373 - Haldex Clutch Control Valve All-Wheel Drive System Overview

T2ah - Double Connector

T4bc - 4-Pin Connector

T8s - 8-Pin Connector

T36 - 36-Pin Connector

V181 - Haldex Clutch Pump All-Wheel Drive System Overview

(377) - Ground Connection 12 (in main wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

(662) - Ground Connection (on left rear C-pillar) Overview of Ground Connections In Luggage Compartment

(B131) - Connection (54) (in interior wiring harness)

(B278) - Plus Connection 2 (15a) (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 636/2 (Tracks 1-14)