Operation CHARM: Car repair manuals for everyone.

Water Pump: Specifications






Water Pump

Coolant Pump to Cylinder Block Bolt 8 Nm






Location of the After Run Coolant Pump






The after run coolant pump is secured to the accessory bracket - arrow -.
To remove, the accessory bracket must be removed from the cylinder block.

Tightening Sequence for the Accessory Bracket
First tighten the alignment bolts - 2 and 4 - by hand.
Then tighten bolts - 1, 3 and 5 - by hand.
Then tighten all bolts uniformly and in a diagonal sequence.

Tightening specification: 23 Nm.