Ribbed Belt

Ribbed Belt

Special tools, testers and auxiliary items required

• Connecting pin (T10027)

Removing

- Remove the noise insulation.

- Mark the running direction of ribbed belt before removing.

- Install a wrench - 1 - onto the belt tensioner bolt and rotate in the - direction of the arrow - far enough until the (T10027) can be inserted to the belt tensioner.





- Remove the ribbed belt.

Installing

• Before installing the ribbed belt, make sure that all accessories (generator, Air Conditioning (A/C) compressor, etc. ) are secured tightly.

• Check the idler pulleys for ease of movement

• Ribbed belt must not be kinked.

• Note the previously marked direction of belt rotation and be sure that it is seated correctly on the pulleys.

- Install the ribbed belt as shown.

- Install the wrench - 1 - onto the belt tensioner bolt and rotate in the - direction of the arrow - far enough until the (T10027) can be remove from the belt tensioner.





After completing the repairs always:

- Start the engine and check the belt running.