Diagram 194/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Relay, Camshaft Adjustment Valves, Intake Manifold Tuning (IMT) Valve, Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Secondary Air Injection (AIR) Pump Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J299 - Secondary Air Injection (AIR) Pump Relay (100) Overview Of Relay Carrier

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N156 - Intake Manifold Tuning (IMT) Valve Locations

N205 - Camshaft Adjustment Valve 1 Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

T14a - 14-Pin Connector, near battery

T121 - 121-Pin Connector

V101 - Secondary Air Injection (AIR) Pump Motor Locations

(655) - Ground Connection (on left headlamp) Overview of Ground Connections In Engine Compartment

(D103) - Connection 3 (in engine compartment wiring harness)

(D119) - Connection 17 (in engine compartment wiring harness)

(D180) - Connection (87a) (in engine compartment wiring harness)

(D181) - Connection 2 (87a) (in engine compartment wiring harness)

Previous Diagram 194/11 (Tracks 127-140)

Next Diagram 194/13 (Tracks 155-168)