Diagram 194/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Camshaft Position (CMP) Sensor, Engine Coolant Temperature (ECT) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G163 - Camshaft Position (CMP) Sensor 2 Locations

G186 - Throttle Drive (for Electronic Power Control (EPC) Locations

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) Locations

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) Locations

J338 - Throttle Valve Control Module Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T6x - 6-Pin Connector

T121 - 121-Pin Connector

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(D101) - Connection 1 (in engine compartment wiring harness)

Previous Diagram 194/13 (Tracks 155-168)

Next Diagram 194/15 (Tracks 183-196)