EVAP System Overview

EVAP System Overview







1 - Separating point
- At right, front in engine compartment under coolant expansion tank
2 - Vent line
- White
- From EVAP canister to evaporative emission (EVAP) canister purge regulator valve N80
- Installation position: Secured at right on underbody and on fuel tank
3 - Vacuum line
- Green
- From intake manifold to Leak Detection Pump (LDP) V144
- Installation position: Secured at right on underbody and on fuel tank
4 - Separating point
- At right, front on fuel tank in area of fuel filter
5 - Fuel filler tube
6 - Vent line
- From filler connection to EVAP canister
7 - Air filter housing
- For Leak Detection Pump (LDP) V144
8 - Leak Detection Pump (LDP) V144
- Component location: Under wheel housing liner in right rear wheel housing
- Checking
9 - Connecting line
- From Leak Detection Pump (LDP) V144 to EVAP canister
- Clipped in on bracket
10 - EVAP filter
11 - EVAP canister
- Component location: Bottom of spare wheel well
12 - Separating point
- At right behind fuel tank
13 - Non-return valve
- Black connection faces toward T-piece
14 - From exhaust flap valve 1 N321
15 - Throttle valve control module J338
16 - Intake manifold
17 - Evaporative emission (EVAP) canister purge regulator valve 1 N80
- Checking