Steel Subframe and Final Drive Assembly Overview

Steel Subframe and Final Drive Assembly Overview, AWD (Rabbit)
The -arrow- points in driving direction.





1 - Subframe
2 - Rear bonded rubber bushing
3 - Front bonded rubber bushing
4 - Final drive
5 - Bolt
^ M12 x 105
^ 60 Nm plus an additional 90° turn
^ Always replace after removal
6 - Washer
^ Installed between final drive and subframe
7 - Washer
^ Washer must be placed with holes on tabs of bonded rubber bushing
8 - Bolt
^ M12 x 105
^ 60 Nm plus an additional 90° additional turn
^ Always replace after removal