R32 Components, All Wheel Drive, Aluminum Subframe

R32 Components, All Wheel Drive, Aluminum Subframe

Coil Spring

Special tools, testers and auxiliary items required

• Spring Compressor Kit (V.A.G 1752)

• Spring Holder (V.A.G 1752/4)

• Adapter (V.A.G 1752/9)

Removing

- Remove wheel.

- Insert spring compressor - 3 -.





CAUTION!
Make sure the coil spring is seated correctly in the spring holder (V.A.G 1752/4).

- Use a wrench or a reversible ratchet to tighten spring compressor.

- Compress coil spring until it can be removed.

- Remove spring.

1. Adapter (V.A.G 1752/9)

2. Bracket (V.A.G 1752/4)

3. Spring compressor (V.A.G 1752/1)

Installing

Installation is in reverse order of removal, with special attention to the following:

End of spring - arrow - must rest against stop of lower spring support





- Install spring together with spring seat.

- Spring seat has a pin on bottom.

- This pin is inserted into hole of lower transverse link - arrows -.





- Then insert spring seat at top into upper spring end.

- Tension spring. To do this, place upper end of spring on body tab.

- Install wheel and tighten. Refer to => [ Wheel Bolt Tightening Specification ] Specifications.