Diagram 81/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Data Bus On Board Diagnostic Interface, Steering Column Electronic Systems Control Module, Windshield Wiper Switch, Windshield Washer Pump Switch, Low Windshield Washer Fluid Level Indicator





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G33 - Windshield Washer Fluid Level Sensor

E22 - Windshield Wiper Intermittent Switch

E44 - Windshield and Headlamp Washer Pump Switch

J285 - Instrument Cluster Control Module

J519 - Vehicle Electrical System Control Module

J527 - Steering Column Electronic Systems Control Module Locations

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console

K37 - Low Windshield Washer Fluid Level Indicator Lamp

T20 - 20-Pin Connector

T20d - 20-Pin Connector

T36 - 36-Pin Connector

(43) - Ground Connection (on right lower A-pillar) Overview of Ground Connections In Interior

(374) - Ground Connection 9 (in main wiring harness)

(382) - Ground Connection 17 (in main wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 81/2 (Tracks 1-14)