Front Bumper Attachments

Front Bumper Attachments

• Depending on the version, the removal and installation process may be slightly different.





1 Cover

• Material PP/EPDM

• Removing and Installing => [ Front Bumper Cover ] Front Bumper Cover

2 Side marker lights

• Left and right

• Not for all countries.

3 Left protective molding

• Material PP/EPDM

• Locked to cover.

• Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.

4 Left vent grille

• Pull forward out of locking mechanism in - direction of arrow -

5 Formed piece

• Not for all countries.

• Locked to cover.

• Only to be removed from removed bumper.

6 Spoiler bracket

• Only to be removed from removed bumper.

7 Spoiler

• Material PC/ABS

• Locked to cover.

• Only to be removed from removed bumper.

8 Center vent grille

• Pull forward out of locking mechanism in - direction of arrow -

9 Bolt

• Tightening specification: 1.5 Nm

10 Right vent grille

• Remove screw - 8 - and pull out forward in - direction of arrow -.

11 Clip

• For separate license plate holder.

• Qty. 4

12 License plate holder

• For different countries.

• Installing => [ (Item 2) License plate holder ]

13 Right protective molding

• Material PP/EPDM

• Locked to cover.

• Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.