Rear Lid Tail Lamp Bulb Holder

Tail lamps

Rear Lid Tail Lamp Bulb Holder

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Unclip cover - 1 - in direction of - arrow - from panel.





- Remove connector - 1 - in - direction of arrow -.





• Lower trim of rear lid must not be removed. For better depiction, trim of lower rear lid is removed in the following illustration.

- Turn lamp carrier - 1 - in - direction of arrow - and remove from taillamp in rear lid.





Installing

Install in reverse order of removal.