Left Bucket Seat Trim

Front Seats

Left Bucket Seat Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Remove bolt - 1 - (2.5 Nm).

- Pull handle - 3 - upward and press metal clamp tab - 2 - inward with a small screwdriver. Remove handle downward from adjusting lever - 4 -.

• For the sake of illustration, securing clip is depicted as removed in the illustration.

- Remove the clip - 2 - from adjusting lever - 4 -.

- Using assembly tool (3399), reach behind backrest adjusting wheel locking mechanisms - 5 -.

- Pry assembly tool (3399) outward - arrow A - and remove backrest adjusting wheel from seat.

- Press clamping pin - 7 - and remove the clip - 6 -.

- Remove trim - 8 - from mounts on seat.





Installation

- To install, perform the steps used for removal in reverse order.