Wheel Bearing Unit, 3-Point Mount

Wheel Bearing Unit, 3-Point Mount

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1332)

Removing

- Loosen drive axle bolt to wheel hub:

• Hex head bolt, refer to => [ Drive Axle Hex Bolt Connection, Loosening and Tightening ] Removal and Replacement

• Twelve point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] Procedures

• Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.

- Remove wheel.

- Remove brake caliper and engage on body with wire.

- Remove ABS wheel speed sensor.

- Remove disc brake.

- Press the drive axle out of the hub as far as possible (in direction of transmission).

- Remove bolts - arrows -.





- Remove wheel bearing unit from wheel bearing housing.

Installing

Installation is in reverse order of removal.

- Install brake caliper.

- Tighten drive axle bolt to wheel hub:

• Hex head bolt, refer to => [ Drive Axle Hex Bolt Connection, Loosening and Tightening ] Removal and Replacement

• Twelve point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] Procedures

• Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.

- Install ABS wheel speed sensor.

- Install wheel and tighten, refer to => [ Wheel Bolt Tightening Specification ] Specifications.

Tightening Specifications