Diagram 643/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch Passive Occupant Detection System Overview

G452 - Seat Occupied Recognition Pressure Sensor Passive Occupant Detection System Overview

G453 - Seat Occupied Recognition Safety Belt Force Sensor Passive Occupant Detection System Overview

J234 - Airbag Control Module, behind lower console Control Modules in Front Part of Vehicle

J519 - Vehicle Electrical System Control Module

J706 - Seat Occupied Recognition Control Module, below front passenger's seat Passive Occupant Detection System Overview

T2q - Double Connector, below driver's seat

T2y - Double Connector, below front passenger's seat

T10e - 10-Pin Connector, below front passenger's seat

T18f - 18-Pin Connector

T75 - 75-Pin Connector

(109) - Ground Connection (in airbag wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

- - - - Only models with seat occupied recognition

Previous Diagram 643/6 (Tracks 57-70)

Next Diagram 643/8 (Tracks 85-98)