Cylinder Head - Specification

Cylinder Head

Torque and Sequence

Tighten the cylinder head bolts - 1 through 12 - in the sequence shown as follows:










Then tighten bolts - 13 - to 10 Nm.






Checking Cylinder Head for Distortion






Check the cylinder head at multiple points for distortion, using a straight edge and feeler gauges.

Maximum permissible distortion: 0.05 mm

If this value is exceeded, the cylinder head must be replaced. It is not permissible to rework the sealing surface.


Intake Manifold Torque & Sequence
Specifications

Camshaft Gear/Sprocket Torque
Specifications